Stravilink PHR

Spring Isolation Hangers

Stravilink PHR* spring isolation hangers are designed to support suspend heavy ceilings, walls, lighting rigs, ducts and pipework and isolate them from the main building structure.

Standard spring hangers are as follows:

  • Stravilink PHR-80: 50-100N (11.25-22.5 lbf) per hanger, 5-10 kg (11-22 lbs)
  • Stravilink PHR-250: 150-350N (33.75-78.70 lbf) per hanger, 15-35 kg (33-7 7bs)
  • Stravilink PHR-500: 250-600N (56-135 lbf) per hanger, 25-60 kg (55-132 lbs)
  • Stravilink PHR-1000: 500-1500N (112.4-337 lbf) per hanger, 50-150 kg (110-330 lbs)
  • Stravilink PHR-2000: 1500-2500N (337-562 lbf) per hanger, 150-250 kg (330-551 lbs)

Main Benefits

 

  • Cost-effective

  • Quick and easy to install

  • Natural frequency at design load around 4Hz

  • Can be used to support and isolate most designs of suspended ceiling

  • Bespoke hangers can be manufactured to meet specific loading and natural frequency requirements on request

  • Steel elements are zinc plated, springs are powder coated

  • Perimeter Strip to isolate the ceiling from the adjacent walls is available to order

 

Design Requirements

 

  • Weight and construction of the supported ceiling (determines the type of hanger)

  • Weight of any elements supported off the suspended ceiling or directly off a hanger

  • Required void between the supporting soffit and the suspended ceiling

 

*Previously known as CDM-PHR

  • Information Available to Download

Case Studies

  • Ambulatory Care Center UZ Leuven (exterior)

    Ambulatory Care Center

    The light gypsum walls at the Ambulatory Care Center UZ Leuven are installed on the edge of the Stravifloor Floor-T floating floors and acoustically decoupled.

  • Hotel Damier (restaurant)

    Hotel Damier

    To prevent noise generated in the bar area from becoming a nuisance in other areas of Hotel Damier, Stravifloor Prefab, Stravilink WH solutions were installed.