Main page content

Entity view (Content)

Stravifloor Jackup-R

Entity view (Content)

  • Extreme Performance

    Extreme Performance

    Uses elastomeric isolators with low stiffness and high resilience, achieving a natural frequency of ≥ 6 Hz or springs achieving a natural frequency of ≥ 2.5 Hz.

  • Jack-up System

    Jack-up System

    The isolated slab is raised off the structure to the required void depth once the concrete has cured.

  • Replaceable & Inspectable

    Replaceable & Inspectable

    Uses isolators that remain accessible, inspectable and replaceable during installation phase or even after installation and concrete pour.

  • Low Risk of Acoustical Bridging

    Low Risk of Acoustical Bridging

    Provides the least amount of contact points reducing the potential for acoustical bridging.

Main Characteristics

  • Available with either spring bearings or natural rubber pads

  • Natural frequency: 6 Hz (with elastomeric pads) or 2.5 Hz (with springs)

  • Product standard height: 100 mm, 150 mm and 200 mm

  • Minimum system height: 110 mm (with elastomeric pads) or 105 mm (with springs)

  • Minimum air gap: 10 mm (with elastomeric pads) or 5 mm (with springs)

 

*Previously known as CDM-MONT

Main Benefits

  • Ensures that the floating floor is decoupled from the substrate

  • Replaceable and inspectable

  • Extremely high load capacity allowing for large spans and few support points

  • Can take high loads before the slab is raised (e.g. used as a storage area during construction)

  • Available with springs or elastomers as bearings

  • Solution for passive and active isolation

  • No formwork needed

  • Total build-up height not dependent on the thickness of the bearing used, allowing low-profile floating floor systems

  • Easy to install and with small labor cost

  • Adjustable overall void beneath the floating floor

 

Case Studies